Semi-automatic lamination machine is mainly used for square-shaped lithium-ion battery batteries Z-shaped laminated,The film is automatically unwound by the motor,After the tension mechanism,Correction mechanism ,then into the stack stage.Four sets of robots will taken out Positive and negative pole piece from the box,After precise positioning stacked on the stack stage,There are four presses on the stack table cross-action pressed pole pieces.Folded batteries are cut off the film, automatic delivery and artificial taping.
| Machine specifications | TOB-GTJDP150-A | TOB-GTJDP200-A | |
| Item | |||
| Electric core specification | H（mm） | 0～20 | 0～20 |
| W（mm） | 30～90 | 80～150 | |
| L（mm） | 50～150 | 150～260 | |
| Tab length (Q)（mm) | Q≤30 | Q≤30 | |
| Compressed air | Pressure 0.5-0.7Mpa (5kgf-7kgf/ｃ㎡ Usage amount 200L/min Dry (with filter device) | ||
| Vacuum |
Must connect the vacuum source (vacuum solenoid valve) |
||
| Temperature / humidity | 5-45℃; 5-65% | ||
| Defective product identification |
Identify the leakage film, Ultrasonic detection of more-chip, Tab adsorption, Tab bend, Electrode bending. |
||
| Single-chip efficiency | Small batteries: 1.3 ~ 1.6s / pcs, large batteries 1.5 ~ 1.8s / pcs | ||
| Operating rate |
97% (malfunction caused by this unit only)
|
||
| Pass rate | 99.8% (Defects caused by this unit only) |
Related reading:Semi automatic laminated machine for battery,Semi-Automatic Winding Machine