TOB-CP60 button battery punching machine dedicated to die cutting,punching process.Equipped with different specifications of the mold can lab for punching and blanking process on the sheet material.The design of the whole machine is small, and it is very convenient to use. It is very suitable for punching die for the battery electrode with the thickness of 0.005 ~ 0.5mm and the separator.

Electric button type sealing machine

TOB-DF160 Mainly used in laboratory sample preparation of battery material R & D,sealing for button cell and capacitor,can also be used for small batch production.Using electric method is convenient and labor saving,Different mold can also be used for dry powder pressing, wet powder pressing,press forming, riveting and other operations.Configuration mold: standard configuration can be used for 20 series button cell. Also can replace parts of the mold for packaging 2430, 2450 etc. button cell.

Product description:

With vacuum drying system progress under vacuum conditions,the method of controlling the temperature of the sample is also getting more and more attention,compared with the conventional drying method, the advantages are as follows:

Semi-automatic lamination machine is mainly used for square-shaped lithium-ion battery batteries Z-shaped laminated,The film is automatically unwound by the motor,After the tension mechanism,Correction mechanism ,then into the stack stage.Four sets of robots will taken out Positive and negative pole piece from the box,After precise positioning stacked on the stack stage,There are four presses on the stack table cross-action pressed pole pieces.Folded batteries are cut off the film, automatic delivery and artificial taping.

Battery tester mainly used in battery materials research, high precision testing, pulse charge discharge test, DC resistance test (DCIR), cycle life test.
Target customer group:

The high efficient automatic lamination machine is mainly used for the Z shape lamination of the square lithium ion power battery electric core.The separator active unwinding by motor ,Through the tension mechanism, the rectification mechanism,then lead into the stack table. The stack table driven the separator to move back and forth reciprocating to place the electrodes.Two sets of robot chuck mechanism removed the positive and negative electrodes from the cartridge,after precise positioning, they placed on the stack table.There are four sets of pressing knife mechanism on the table cross action pressing the electrodes.After lamination is completed,Transfer batteries to plastic stickers station,Automatic end roll, cut off the separator, automatic adhesive plaster; battery cores automatic output.