Battery Lab Equipment,Lithium Battery Separator,Battery Testing Machine

1. Stacking: The drugs to be sterilized are wrapped and then placed sequentially on the sieve plate inside the sterilization bucket with proper clearance between the bag and the package to facilitate the cold air in the sterilization bucket to overflow and steam penetration, improve sterilization.
2. Add water: add 4 liters of clean water in the portable sterilizer body, the water will gradually evaporate in the process of extinguishing, the water level will be reduced accordingly. Therefore, before each sterilization, make up the amount of water inside the sterilizer main body, so as not to dehydration dry electric heater, electric heater damage.

Most people don’t take bilge pumps seriously unless they’ve had a boat flooded or sunk already. That’s a mistake. Sinking at the dock is one thing, but sinking 20 miles offshore is bad news. All it takes is one faulty exhaust hose to fill a hull full of water. The size of your bilge pump needs to work with the size of your boat. Any boat that is over 16 feet in length will want to invest into two pumps instead of just one.

Lithium-ion battery falls mainly into three categories: power, consumer electronics and energy storage (ESS) according to the applications.Lithium batteries for consumer electronics, including mobile phones, laptops, digital cameras and other 3C products, accounted for 62% of the global total lithium battery output in 2015. However, with the increasing global demand for new energy vehicles, lithium battery in consumer electronics sale declines year by year. It is estimated that the proportion of power lithium battery to the total applications of lithium batteries in China will increase to 70% in 2020 from 34% in 2015 , and became the mainstream of lithium battery applications.

Follows are the Lithium Battery Cells we use to make battery packs they are A123 18650 26650 battery cells and some other powerful imported cells like sansung, LG, sanyo and panasonic

A transformer is an electrical device that transfers electrical energy between two or more circuits through electromagnetic induction. a varying current in one coil of the transformer produces a varying magnetic field.

High frequency transformers and low frequency transformers for Industry use are widely used in the following industry, such as Cosmetic machinery system, instrument system:

In recent years, scooters has rapid developed in Europe, Asia.

Nimrod Sapir from Israel has developed the inokim series of scooters, an innovative urban transportation solution,

We know that the disinfection of materials often due to one or more of the following reasons: the material flow, easy handling, easy to save and storage, reduce shipping costs, access to the desired product quality. In the production process, due to equipment quality, supporting components and basic research and other aspects still need to be further improved, the current routine disinfection and sterilization is still the main form of disinfection and sterilization.

Sterilization by means of a suitable physical or chemical means to kill microorganisms living in the article or method to remove. This law applies to sterile preparation, raw materials, accessories and medical equipment and other items. Sterile refers to goods does not contain any living micro-organisms. However, for any number of steam bottle sterilizer products, both can not guarantee absolute sterility test can not be used to confirm. Physical or chemical means sterilization tests showed: kill microorganisms on the number of rules to follow, therefore, sterile sterilized items after items sterilization standards generally microbial survival probability – sterility assurance level SAL (Sterility Assurance Level) said. Probability of surviving microorganisms terminally sterilized product shall not exceed 10-6. Sterilized products meet the sterility assurance level can be determined by verification. Sterilization and sterility assurance products can not rely on sterility testing of the final product, but on the process used in the production of qualified sterilization process, strict management and good GMP comprehensive quality assurance system. Sterilization process should be determined by considering the nature of the items to be sterilized, effective and economic method of sterilization, the sterilization integrity and stability of the article and other factors.
Validate the sterilization process is a necessary condition of sterility assurance. Sterilization process validated only after the delivery of official use. Verify that include:

With the development of new energy vehicles, lead-acid start battery is being replaced by Lithium Iron Phosphate batteries which have the advantage of  high charge / discharge performance, lighter weight, smaller size, longer cycle life, no pollution etc.

After two years’ research and tesing on start batteries, we build up a professional team which successfully designed a series of car start battery (12v20Ah, 12v40Ah, 12v60Ah, 12v80Ah)with BMS built in .

Rainwater recycling involves collecting rainwater from a building’s roof or from any other surface, including nowadays permeable pavements and garden lawns. The rainwater then passes through a filter, which eliminates debris, and is stored in a holding tank placed either underground or the side of a building or in the loft.

This saved water can be pumped to places where it is needed. Since the water collected by most rainwater harvesting systems is not drinkable (without substantial treatment), plumbing regulations dictate that the collected rainwater be passed through a dedicated pipe system, and not the building’s drinking water system.

A lithium battery is mainly composed of two parts: cells and BMS (Battery Management System).

Lithium cells consist of the anode, separator, cathode,electrolyte, and the materials are rolled or laminated to make into the cells.