In order to solve the problem of material testing in the battery R&D process, our company has successfully developed the coin cell battery test module.
T-CM-2032 After coin cell assembly cathode, separator and anode, the wrench directly sealed in the module, you can remove from the glove box directly for the discharge performance test. After discharge, can be directly removed, all parts can be reused, easy to observe the internal material after discharge,stable and reliable structure, the test results are good. Can be used more than 1,000 times.
Usually coin cell are in the anode, coin cell separator, cathode film assembly is completed, add the electrolyte and spacer, sealed with a mold. As shown in Figure:
B. Instructions:
1, the spring into the assembly of the under module, adjust the length to moderate, such as a;
2, put the assembled button cell into the glove box, such as b;
3, assembled the PTFE gaskets and sealing gaskets on the upper cover,put into the upper module, such as c;
4, Tighten the whole. Remove from the glove box and install on a test stand.
C. Assembly sequence:
We can supply a full set of materials and equipment for battery research.
If you are interesting in this, Please contact me：
E-mail：tob.mae@tobmachine.com
WhatsApp：+86 18150114193